Home/Tech & Practice
Fitting
Small job, long-term benefit
One hose to the filter, one hose back. Any workshop can do that in around 1 to 2 hours. You can also fit the filter yourself. Every filter comes with detailed instructions.
- Quick fitting
- One-off conversion cost
- According to the manufacturer, no approval and no TÜV inspection needed
- After that, low costs: only new inserts
Originale: Bestellseite, 2001 · Fragen und Antworten, 2010 · Startseite, 2001
Fitting plans
Engine, hydraulics, oil heating
Original: Montageanleitung im Archiv · Ölheizungen, 2010
Tips for the workshop
- Best when cold
Fit the filter when the engine is cold. Change dirty engine oil before or after fitting.
- In the airflow
The more airflow reaches the housing, the better it cools. Because of vibration, avoid mounting it directly on the engine if possible.
- Any position
The housing can sit in any position. Upright makes changing the insert easier later.
- Not at the breather
Do not put the oil return connection near the engine breather. Otherwise oil can escape there.
- Change the insert
Takes 5 to 10 minutes. Watch the direction: the closed side of the sleeve points towards the oil inlet.
- At the valve cover
The manufacturer calls the oil return to the valve cover the technically best connection. This way the camshaft can also get extra oil.
- Check regularly
The manufacturer requires a regular visual check of the filter and hoses, best done together with the oil level.
Was der Hersteller zu Freigabe und Garantie schreibt, steht in den Fragen und Antworten. Originale: Montageanleitung, 2001 · Geschäftsbedingungen von 1998 · · Datenblatt, 2011
From the archive
The original fitting sheets
The instructions from the archive, to enlarge. For your own fitting, follow the current instructions supplied with the filter. Text instructions in the archive